Auto >> AutoSPT >  >> Car Photos

How can I see the fly wheel mark for fiat palio 1..2?

**Here are the steps on how to check flywheel marks for Fiat Palio 1.2:

1.** Put the transmission into 4th gear and apply the parking brake.

2. Loosen the crankshaft bolt while you are holding the wheel nut bolts to prevent the engine from turning.

3. Remove the crankshaft bolt and the front camshaft sprocket.

4. Clean the flywheel using a degreaser and a brush.

5. Locate the flywheel marks. There should be two marks, one on the flywheel and one on the engine block.

6. Align the flywheel marks and then reinstall the front camshaft sprocket and the crankshaft bolt. Tighten the crankshaft bolt to the correct torque specification.

7. Start the engine and check that it is running smoothly.

8. Verify that the flywheel mark still aligned after running.

Auto Repair
How Can I Tell if My Vehicle’s Suspension Has Problems? The words Damage may occur removing air cleaner from carburetor appear on the backplate of my Harley 1997 Sportster 883 What damage could and how do you prevent it?
Car Care
Everything You Need to Know About Oxygen Sensors 4 Most Common Signs You Need Brake Repair Can you sell your car if it is being used in a cross collateral loan?
Engine
2001 Nissan altima 2.5 engine idles up and down Cleaned throttle body does computer need reprogrammed? How much oil does a generac 33 hp engine hold?
Electric Car
How often should you change the spark plugs on a 2004 jeep liberty 3.7 L? You have an 87 Lincoln town car It stalls when you press the gas but if barely it will run Before would fix itself and not stall Now is doing everytime? What size engine does the 2010 Chevrolet Camaro have?
Autopilot
How do you set edelbrock carb? What will Driverless Cars Look Like?
Car Photos
Will 2005 Mustang Wheels which have same bolt pattern fit a 1999 Crown VIC cannot find the offset spec for either car? What is the EPA city and highway mileage estimate for 2005 Honda Civic? Where can you find classic car values?