* Flat-head screwdriver
* Phillips-head screwdriver
* Trim-removal tool
* 10mm socket wrench
* Ratchet
Instructions:
1. Prepare the door by rolling down the window all the way and removing the mirror cover if equipped.
2. Use a trim-removal tool to pry off the plastic cover on the door handle.
3. Use a Phillips-head screwdriver to remove the two screws holding the door handle in place.
4. Pull the door handle out and disconnect the electrical connector.
5. Use a 10mm socket wrench to remove the three bolts holding the inner door panel in place.
6. Use a trim-removal tool to pry off the plastic clips holding the inner door panel in place.
7. Pull the inner door panel off and set it aside.
