Materials:
- Phillips-head screwdriver
- Flat-head screwdriver
- Tape measure
Instructions:
1. Park your Voyager on a flat surface 25 feet from a wall or garage door.
2. Turn on the headlights.
3. Open the hood.
4. Locate the headlight adjustment screws on the back of each headlight housing. There will be two screws, one for vertical adjustment and one for horizontal adjustment.
5. Use the Phillips-head screwdriver to turn the vertical adjustment screw clockwise to raise the headlight beam, or counterclockwise to lower it.
6. Use the flat-head screwdriver to turn the horizontal adjustment screw clockwise to move the headlight beam to the right, or counterclockwise to move it to the left.
7. Use a tape measure to make sure the headlights are aligned properly. The center of each headlight beam should be aimed at the same height on the wall as the center of the Voyager's hood.
8. Once the headlights are aligned, close the hood.
