* Phillips-head screwdriver
* Flat-head screwdriver
* Socket wrench set
* Extension bar
* Ratchet
Instructions:
1. Open the hood of your Ford Ranger.
2. Locate the headlight assembly that you need to access.
3. Remove the four Phillips-head screws that secure the headlight assembly to the radiator support.
4. Carefully pry the headlight assembly out of the radiator support. Be careful not to damage the headlight assembly or the radiator support.
5. Disconnect the electrical connector from the back of the headlight assembly.
6. Set the headlight assembly aside.
7. You can now access the headlight bulb.
To replace the headlight bulb:
1. Remove the rubber dust cover from the back of the headlight assembly.
2. Turn the headlight bulb counterclockwise and remove it from the socket.
3. Inspect the old headlight bulb for damage.
4. If the old headlight bulb is damaged, replace it with a new bulb.
5. Screw the new headlight bulb into the socket and turn it clockwise until it is snug.
6. Replace the rubber dust cover.
To reassemble the headlight assembly:
1. Connect the electrical connector to the back of the headlight assembly.
2. Carefully insert the headlight assembly into the radiator support.
3. Secure the headlight assembly with the four Phillips-head screws that you removed in step 3.
4. Close the hood of your Ford Ranger.
