Materials and Tools Needed:
- New side mirror assembly
- Screwdriver or ratchet
- Pry tool or trim removal tool
- Electrical tape (if wires are cut)
Step 1: Safety Precautions
- Park the Peugeot Boxer on a level surface, apply the parking brake, and turn off the engine.
- Turn on your hazard lights and keep the vehicle in a well-lit area.
- If the side mirror has electrical components (heated mirror or power adjustment), disconnect the battery to avoid any electrical hazards.
Step 2: Removing the Old Side Mirror
- Locate the screws that hold the side mirror housing in place. On a Peugeot Boxer, these are typically located behind a plastic cover.
- Use the screwdriver or ratchet to loosen the screws and remove the side mirror housing.
- Be careful not to drop the screws as you remove them.
- Disconnect any electrical connectors you find behind the housing.
Step 3: Removing the Old Mirror Glass
- Once the housing is removed, you should see the side mirror glass.
- Gently pry the mirror glass out of the housing, being careful not to break it.
- There may be retaining clips or adhesive holding the glass in place, so be cautious.
Step 4: Preparing the New Side Mirror
- Take the new side mirror assembly and remove the protective packaging.
- Check the new side mirror to ensure it is compatible with your vehicle model.
- Connect any necessary electrical connectors for features such as heated or power-adjustable mirrors.
Step 5: Installing the New Mirror Glass
- Place the new mirror glass into the housing of the new side mirror assembly.
- Make sure the mirror is properly seated in its brackets and clips, and that it is securely fastened.
Step 6: Installing the New Side Mirror Housing
- Carefully align the new side mirror housing with the mounting points on your Peugeot Boxer.
- Insert the screws you removed earlier and tighten them securely.
- Double-check that the side mirror is firmly attached.
Step 7: Reconnect Electrical Connectors (if applicable)
- If the side mirror has electrical adjustments, heated mirror functionality, or turn signal indicators, reconnect the electrical connectors.
Step 8: Functionality Testing
- Once everything is installed and connected, test the functionality of the side mirror to ensure it adjusts properly, if applicable. If the side mirror has turn signal indicators, check if they work correctly.
Step 9: Clean and Inspect
- Clean any fingerprints or smudges from the mirror surface.
- Inspect the mirror to make sure it is properly aligned and secure.
Step 10: Reconnect the Battery (if applicable)
- If you disconnected the battery earlier for electrical safety, reconnect it now.
Remember, if you're unsure about any of these steps or are uncomfortable performing the repair yourself, it's best to consult with a professional mechanic to ensure the job is done correctly.
