1. Park the scooter on a level surface and turn off the engine.
2. Loosen the oil pan bolt. The oil pan bolt is located on the bottom of the scooter.
3. Place an oil pan under the scooter to catch the old oil.
4. Allow the old oil to drain completely.
5. Replace the oil pan bolt.
6. Remove the oil fill plug. The oil fill plug is also located on the bottom of the scooter.
7. Add new oil. Add enough oil to fill the scooter to the proper level. The proper level is indicated on the oil dipstick.
8. Replace the oil fill plug.
9. Start the scooter and let it run for a few minutes. This will help circulate the new oil.
10. Check the oil level again. If the oil level is not correct, add or drain oil as needed.
