1. Park the ATV on a level surface and turn off the engine.
2. Locate the brake adjuster on the rear of the ATV. It is a small, round knob located near the brake lever.
3. Turn the adjuster clockwise to tighten the brakes.
4. Test the brakes by squeezing the brake lever. The brakes should engage firmly and smoothly.
5. If the brakes are too tight, turn the adjuster counterclockwise to loosen them.
6. Repeat steps 3-5 until the brakes are adjusted to your desired setting.
Note: It is important to adjust both rear brakes equally to ensure that the ATV brakes evenly.
