*1. Remove the air filter and air filter cover.*
*2. Disconnect the fuel line from the carburetor.*
*3. Remove the float bowl drain screw and let the fuel drain out of the carburetor.*
*4. Remove the float bowl screws using a pair of pliers or a screwdriver.*
*5. Remove the float bowl and gasket.*
*6. Inspect the float needle and seat for damage. If the needle is damaged or worn, replace it.*
*7. Clean the float bowl and gasket with carburetor cleaner.*
*8. Reinstall the float bowl gasket and float bowl.*
*9. Tighten the float bowl screws snugly.*
*10. Reinstall the air filter cover.*
*11. Reinstall the seat.*
*12. Connect the fuel line to the carburetor.*
*13. Start the engine and check for leaks.*
