Disclaimer: This information is for informational purposes only. Replacing rotors is a mechanical task that requires specific tools, knowledge, and safety precautions. If you're not comfortable performing this task yourself, it's recommended to have a qualified mechanic do it.
Tools and Supplies:
* Jack and Jack Stands: To safely lift the car.
* Lug Wrench: To remove the wheels.
* Torque Wrench: To properly tighten the lug nuts.
* Brake Caliper Wrench: To compress the caliper piston.
* Hammer: To remove the old rotor.
* Brake Cleaner: To clean the hub and caliper.
* Anti-Seize Compound: To lubricate the new rotor and prevent rust.
* New Front Rotors: Make sure you get the correct size and type for your car.
* Safety Glasses and Gloves: For protection.
Procedure:
1. Park the car on a level surface and engage the parking brake.
2. Loosen the lug nuts on both front wheels.
3. Use the jack to lift the car and place jack stands under the frame. Never work under a car supported only by a jack.
4. Remove the wheels.
5. Clean the brake dust and debris from the caliper and hub.
6. Use the caliper wrench to compress the brake caliper piston. This is necessary to create space for the new rotor.
7. Remove the old rotor by tapping it with the hammer.
8. Clean the hub thoroughly and apply anti-seize compound to the hub surface.
9. Install the new rotor by carefully sliding it onto the hub.
10. Clean the caliper piston and install it back into the caliper.
11. Apply anti-seize compound to the rotor mounting points.
12. Reinstall the wheel and tighten the lug nuts to the correct torque specification. Refer to your car's owner's manual for the proper torque value.
13. Repeat the process for the other side.
14. Lower the car and remove the jack stands.
15. Test the brakes gently.
16. Check the brake fluid level and add fluid if necessary.
Important Tips:
* Always use safety glasses and gloves.
* Never work under a car supported only by a jack.
* Be careful not to damage the brake pads or other brake components.
* Replace the brake pads if they are worn.
* Have the brakes inspected by a mechanic after installing new rotors.
Note: This procedure is a general guide. Always consult your car's owner's manual for specific instructions and torque specifications. If you have any doubts about your abilities, it's best to have a qualified mechanic perform the work.
