1. Locate the Spare Tire: The spare tire's location differs depending on the Suburban's year. Common locations include:
* Under the vehicle: This is the most common location. You'll usually find it underneath the rear cargo area. There's typically a panel or cover you need to remove to access it.
* Inside the vehicle: Some models may have the spare inside the cargo area, often taking up some floor space.
2. Access the Spare Tire:
* Underneath: You'll likely need to lower the rear cargo floor or remove a panel to access the spare. There might be a release lever or handle to assist with this. Consult your owner's manual for specific instructions.
* Inside: Simply remove the covering or panel over the spare tire.
3. Release the Spare Tire:
* Lowering Mechanism: Most under-vehicle spares are secured by a cable or a winch system. There will be a crank or handle to loosen and lower the spare tire. Again, your owner's manual will detail the exact method.
* No Lowering Mechanism: If the spare is simply held in place, it may be secured by straps or a retaining bracket. Carefully unfasten these.
4. Remove the Spare Tire: Once the securing mechanism is released, carefully remove the spare tire. It can be heavy, so be prepared to lift it.
5. (If applicable) Remove the Tools: Often the jack, lug wrench, and other tools are stored with the spare. Retrieve these.
Crucially Important Note: Always consult your Chevy Suburban's owner's manual. It will contain detailed, illustrated instructions specific to your vehicle's year and model, ensuring you do not damage anything in the process. Improper removal could lead to injury or damage to your vehicle.
The owner's manual will show you exactly where the spare is, how to access it, and the proper way to release and remove it. It's the best and safest resource available.
