1. Safety First:
* Disconnect the battery's negative terminal. This is crucial to prevent electrical shocks.
* Wear safety glasses. There might be some loose parts or fluid spills.
2. Preparation:
* Locate the alternator. It's usually located on the engine's front, near the engine's drive belt system.
* Identify the alternator's connections. There will be at least two: a large wire (usually thick and red for the power) and a smaller wire (often smaller gauge and a different colour, possibly black for the field wire). There might also be a sensor wire.
3. Disconnecting the Alternator:
* Disconnect the electrical connections. Use a wrench or pliers to carefully loosen and remove the nuts or bolts securing these wires to the alternator. Note which wire goes where – take pictures if needed.
* Remove the alternator's belt. You'll likely need to loosen the tensioner pulley to allow the belt to slip off the alternator pulley. The method for doing this varies greatly depending on the car and its engine, so consult your workshop manual. Some methods involve a wrench or socket, others a special tensioning tool.
4. Removing the Alternator:
* Remove the alternator mounting bolts. These are usually two or three bolts attaching the alternator to the engine block or bracket. You'll need the appropriate sockets and wrenches.
* Carefully remove the alternator. It can be heavy, so be prepared to support its weight. Be mindful of any nearby components you might accidentally hit or scratch during removal.
5. Reinstallation:
Reinstallation is the reverse of removal. Ensure everything is properly connected and tightened before reconnecting the battery.
Important Considerations:
* Workshop Manual: This is absolutely essential. The exact procedure will vary based on the specifics of your EB Falcon.
* Tools: You'll need the correct sockets, wrenches, and possibly a belt tensioning tool.
* Accessibility: Access to the alternator can be tight. You may need to remove other components to get to it properly.
* Weight: The alternator is heavy. Be careful not to drop it.
Disclaimer: This is a general guide only. Attempting this without proper knowledge and tools could result in damage to your vehicle or personal injury. If you're not comfortable working on your car, take it to a qualified mechanic.
