Tools You'll Likely Need:
* Panel Removal Tools: Plastic pry tools (to avoid scratching the door panel), possibly a trim removal tool.
* Screwdrivers: Phillips head and possibly flathead, various sizes.
* Socket Set/Wrench Set: To remove the regulator from the door.
* New Window Regulator: Make sure to get the correct one for your 2000 Intrigue (driver's side or passenger's side).
* Electrical Tape or Connectors: To reconnect the electrical connector to the new regulator.
* Grease or Lubricant: For the new regulator's moving parts.
* Patience: This job takes time and careful attention.
Steps:
1. Disconnect the Battery: This is crucial for safety to prevent accidental shorts.
2. Remove the Door Panel: This is the most time-consuming part. You'll need to:
* Carefully pry off the armrest cover (if applicable).
* Remove screws around the door panel's perimeter. These are often hidden under trim pieces or access covers.
* Gently pry the door panel away from the door, being mindful of the various clips that hold it in place. Work your way around the panel, releasing the clips one by one. You may need to carefully disconnect electrical connectors for the power window switch and interior light.
3. Disconnect the Window Motor: Unplug the electrical connector from the window motor. Take a picture or note how it's connected for reassembly.
4. Remove the Old Regulator: This will involve removing screws and possibly bolts that hold the regulator to the door. The regulator assembly is likely attached to the window itself. You may need to carefully maneuver the window to access the fasteners.
5. Install the New Regulator: Once the old regulator is removed, carefully install the new one, ensuring it's properly aligned and secured with all the appropriate fasteners. Lubricate the moving parts of the new regulator as needed.
6. Reconnect the Window Motor: Carefully plug the electrical connector back into the new window motor.
7. Reinstall the Door Panel: Carefully align the door panel and reattach it to the door, ensuring all the clips are properly seated. Replace any screws you removed.
8. Reconnect the Battery: Reconnect the battery terminals.
9. Test the Window: Test the window operation to ensure everything works correctly.
Important Considerations:
* Window Glass: The window glass can be heavy and easily damaged. Support it carefully during removal and reinstallation. You may need to use a helper to hold the glass while you work.
* Clips and Fasteners: Take your time removing the door panel to avoid breaking any clips. It's a good idea to have replacement clips on hand just in case.
* Repair Manual: A repair manual for your specific vehicle will provide detailed instructions and diagrams, making the process much easier and safer. This is highly recommended.
* Professional Help: If you're not comfortable working on your car, consider taking it to a qualified mechanic. Replacing a window regulator can be more difficult than it initially appears.
This detailed outline is for informational purposes only. Always refer to a reliable repair manual for your specific vehicle make, model, and year before attempting this repair. Improper installation can lead to damage or injury.
