Here is the answer the how much transmission fluid does a 4160e hold and other essential answers to some of a few relevant question about 4160e and Transmission.
The 4L60E (and the related 4L65E) is a series of General Motors automatic transmissions. The series includes 4 forward gears and 1 reverse gear, designed for longitudinal engine configurations.
| Cadillac Escalade | GMC Canyon, 2004-2012 | Chevrolet S-10 Blazer, 1994-2005 |
| Cadillac Escalade EXT | GMC Envoy, 2003-2009 | Chevrolet Camaro, 1994–2001 |
| Chevrolet Corvette, 2005 only | GMC Jimmy, 1993-2005 | Chevrolet Caprice, 1994-1996 |
| Chevrolet Silverado SS | GMC Safari, 1993-2005 | Chevrolet C/K, 1993-2000 |
| GMC Sierra Denali | GMC Savana, 2003-2013 | Chevrolet Colorado, 2004-2012 |
| GMC Yukon Denali | GMC Sierra, 1500-2500 (2500 with 6 bolt axle pattern) | Chevrolet Corvette, 1994–2004 |
| Holden Commodore, VZ 6.0 only | GMC Sonoma, 1994-2005 | Chevrolet Express, 2003-2012 |
| Holden Crewman, 2004 only | GMC Yukon | Chevrolet Impala SS, 1994–1996 |
| Holden One Tonner, 2004 only | GMC Yukon XL Denali | Chevrolet S-10, 1994-2005 |
| HSV Clubsport VZ | GMC Vandura, 1993-1996 | Chevrolet Silverado 1500-2500 |
| Hummer H2 |
The 4L60e’s fluid volume is 12 quarts (dry) of transmission fluid. This volume is based on a stock, with a 12 “torque converter,” shallow “transmission pan.” The ability of additional fluid will range from an extra quart or more with a deep pan.
Most passenger vehicles take from 12 to 16 quarts of transmission fluid, but the model of the vehicle dictates the type and how much. While many vehicles come with a dipstick to check the transmission fluid, there are other models that do not.
When installing the converter onto the transmission, please pour approximately one quart of ATF (automatic transmission fluid) into the converter before installing it into the transmission.
Finish the installation of the transmission. When finished, install four quarts of ATF in the transmission. Start the engine and immediately add two more quarts. Now, you can add additional fluid to fill the transmission.
To check your automatic transmission fluid, follow these steps:
In 2006, GM superseded Dexron III as the recommended fill with Dexron VI, which is backward compatible with the earlier versions. The transmission typically accepts a 6.3-quart fill.
Open the driver’s side door to see a white card covered with tiny black lettering on the side of the door. Specific details of the year the car was built, its transmission, engine specs, and other details are included in this card. There will be a number code underneath or beside the ‘TR’ sign.
As they use a separate torque converter and input shaft, they are not fully compatible with the 4L60E. … But if a 4L65E is to be used, make sure you have the 300 mm torque converter with it.
Here is a complete topic of when and what circumstances occurred when needs of transmission fluid.
Best Overall ATF
Price: $20.54 1 GA
Pros
Cons
Price: $22.32 1 GA
Pros
Cons
Price: $15.99 1 QT
Pros
Cons