* A screwdriver
* A tape measure
* A level
Step 1: Prepare your truck.
* Park your truck on a level surface.
* Turn off the engine and allow the headlights to cool down.
* Open the hood of your truck.
Step 2: Locate the headlight adjustment screws.
* The headlight adjustment screws are located on the back of the headlight assembly.
* There are two screws for each headlight, one for vertical adjustment and one for horizontal adjustment.
Step 3: Measure the current height of the headlights.
* Use a tape measure to measure the height of the headlights from the ground to the center of the beam.
* Write down the measurements.
Step 4: Adjust the vertical headlights.
* Use a screwdriver to turn the vertical headlight adjustment screw clockwise to raise the headlights or counterclockwise to lower them.
* Adjust the screw until the headlights are at the same height as you previously measured.
Step 5: Adjust the horizontal headlights.
* Use a screwdriver to turn the horizontal headlight adjustment screw clockwise to rotate the lights to the left or counterclockwise to move them to the right.
* Adjust the screw until the headlights are pointing straight ahead.
Step 6: Verify the headlight adjustments.
* Once you have adjusted the headlights, close the hood of your truck and turn on the headlights.
* Verify that the headlights are properly aimed and pointing straight ahead.
* If necessary, make any further adjustments.
That's it! You have now successfully adjusted the headlights on your 2007 Dodge truck.
