- A Phillips head screwdriver
- A flat head screwdriver
- A 10mm socket wrench
- A ratchet
1. Open the hood of your Avenger.
2. Remove the four Phillips head screws that secure the headlight assembly to the front of the vehicle.
3. Use the flat head screwdriver to pry the plastic trim piece away from the headlight assembly.
4. Use the 10mm socket wrench to remove the two nuts that secure the headlight assembly to the fender.
5. Disconnect the electrical connector from the back of the headlight assembly.
6. Lift the headlight assembly out of the vehicle.
To install the new headlight assembly, simply reverse the steps above.
