2. Remove the steering wheel. There are two bolts that hold the steering wheel in place. Remove these bolts and then pull the steering wheel straight off.
3. Remove the turn signal switch. There are two screws that hold the turn signal switch in place. Remove these screws and then pull the turn signal switch straight out.
4. Remove the ignition switch. There are two screws that hold the ignition switch in place. Remove these screws and then pull the ignition switch straight out.
5. Remove the tilt and telescoping steering column. There are four bolts that hold the tilt and telescoping steering column in place. Remove these bolts and then pull the steering column straight out.
6. Inspect the tilt and telescoping steering column. Look for any damage to the steering column. If you find any damage, you will need to replace the steering column.
7. Reinstall the tilt and telescoping steering column. Insert the steering column into the dash and install the four bolts that hold it in place.
8. Reinstall the ignition switch. Insert the ignition switch into the dash and install the two screws that hold it in place.
9. Reinstall the turn signal switch. Insert the turn signal switch into the dash and install the two screws that hold it in place.
10. Reinstall the steering wheel. Insert the steering wheel onto the steering column and install the two bolts that hold it in place.
11. Reconnect the battery.
