Phillips head screwdriver
Flathead screwdriver
Pliers
Instructions
1. Open the door and locate the two Phillips head screws that hold the door handle in place.
2. Remove the two screws and set them aside.
3. Use the flathead screwdriver to pry up on the door handle until it comes loose.
4. Disconnect the electrical connector from the door handle.
5. Remove the door handle from the door.
To install a new door handle, simply reverse the steps above.
Here are some additional tips that may be helpful:
1. Be careful not to drop the screws when you remove them.
2. If the electrical connector is difficult to disconnect, you may need to use pliers to gently pry it apart.
3. When installing the new door handle, make sure that the electrical connector is properly connected before you screw the door handle in place.
