1. Allen wrench set
2. Adjustable wrench
3. 5mm hex wrench
4. Phillips head screwdriver
5. Chain whip
6. Cassette lockring tool
7. Tire levers
8. New inner tube (if needed)
9. New tire (if needed)
10. Spoke wrench
Instructions:
1. Deflate the tire: Use the adjustable wrench to loosen the valve cap and press the valve stem to release the air.
2. Remove the wheel: Use the Allen wrench set to loosen the bolts on the quick-release skewer or axle nuts on the non-drive side of the bike. Then, pull the wheel out of the frame.
3. Inspect the tire: Check for any damage or bulges in the tire. If the tire is damaged, it will need to be replaced.
4. Remove the tire: Use the tire levers to pry the tire off the rim. Be careful not to damage the rim.
5. Inspect the inner tube: Check for any holes or punctures in the inner tube. If the inner tube is damaged, it will need to be replaced.
6. Replace the inner tube: If necessary, insert a new inner tube into the tire. Make sure that the valve stem is aligned with the hole in the rim.
7. Re-install the tire: Place the tire back on the rim, starting with one side and working your way around. Use the tire levers to help get the tire seated properly.
8. Inflate the tire: Use a floor pump or hand pump to inflate the tire to the recommended pressure.
9. Reinstall the wheel: Slide the wheel back into the frame and replace the quick-release skewer or axle nuts. Tighten the bolts securely.
10. Adjust the spoke tension: If necessary, use the spoke wrench to adjust the tension of the spokes until the wheel is true and the tire is running straight.
If you have any questions or difficulties fixing your crooked back tire, you can always take it to a bike shop for professional assistance.
