2. Remove the door panel. There are usually a few screws or bolts that hold the door panel in place. Once you have removed these, you can gently pry the panel off of the door.
3. Locate the window motor. The window motor is usually located inside the door, near the bottom. It is usually attached to the window regulator with a few bolts.
4. Disconnect the electrical connector. There is usually an electrical connector that connects the window motor to the car's electrical system. Disconnect this connector.
5. Remove the bolts that hold the window motor in place. Usually two or three bolts hold the window motor in place. Remove these bolts.
6. Remove the window motor. Once you have removed the bolts, you can remove the window motor from the door.
7. Replace the window motor. If you are replacing the window motor, insert the new motor into the door and secure it with the bolts you removed earlier.
8. Reconnect the electrical connector. Connect the electrical connector to the window motor again.
9. Reinstall the door panel. Replace the door panel and secure it with the screws or bolts that you removed earlier.
10. Reconnect the battery. Reconnect the battery to the car's electrical system.
