Tools and Materials Needed:
1. Replacement Door Mirror (color-matched or as desired)
2. Phillips Head Screwdriver
3. Flat Head Screwdriver (optional)
4. Pliers
5. Scissors
Step 1: Remove the Old Door Mirror Housing
1. Locate the screws that secure the door mirror housing to the door.
Usually, there are two screws, one at the top and one at the bottom.
2. Use the Phillips head screwdriver to loosen and remove the screws.
3. Once the screws are removed, carefully pry off the mirror housing from the door panel using a flat head screwdriver (if necessary).
Step 2: Disconnect Electrical Wiring (If Equipped)
1. If the door mirror has electrical features (e.g., power adjustment or heated mirror), you'll need to disconnect the electrical connector.
2. Gently pry open the housing to access the electrical connector and unclip it.
Step 3: Remove the Old Mirror Glass
1. Place your hand inside the mirror housing and locate the retaining clip that holds the mirror glass in place.
2. Using the pliers, carefully release the retaining clip and remove it from the mirror glass.
3. Gently pull out the old mirror glass from the housing.
Step 4: Install the Replacement Mirror Glass
1. Take your new door mirror glass and position it correctly within the housing.
2. Make sure that the hooks or tabs of the mirror glass are properly aligned with the corresponding slots on the housing.
3. Insert the retaining clip back into place and ensure that it is securely holding the mirror glass in position.
Step 5: Reattach the Door Mirror Housing
1. Align the door mirror housing with the door panel, making sure that the screw holes line up.
2. Insert the screws that were removed in Step 1 and tighten them using the Phillips head screwdriver.
Step 6: Reconnect Electrical Wiring (If Equipped)
1. If you disconnected the electrical connector earlier, reconnect it now by clipping it back into place.
2. Make sure that the electrical connection is secure.
Step 7: Test the Mirror
1. Test the movement and adjustment of the new door mirror, ensuring that it operates smoothly.
2. If applicable, test any electrical features (e.g., power adjustment or heating).
Remember that while this guide provides a general overview of the steps involved, it's always best to refer to your vehicle's specific repair manual or consult with a professional mechanic if you are unsure about the process.
