* Small screwdriver
* Prying tool
* Replacement key fob battery (CR2032)
Procedure
1. Locate the key fob release button on the back of the key fob. It is usually a small, round button located near the top or bottom of the fob.
2. Press the key fob release button and pull the key fob apart. The key fob should come apart into two pieces: the front cover and the back cover.
3. Locate the battery compartment in the back cover of the key fob. It is usually a small, rectangular compartment with a plastic cover.
4. Use the prying tool to pry open the battery compartment cover.
5. Remove the old battery from the battery compartment.
6. Insert the new battery into the battery compartment. Make sure that the positive (+) terminal of the battery is facing up.
7. Close the battery compartment cover and snap the key fob back together.
Tips
* If you are having trouble opening the key fob, try using a small screwdriver to pry open the key fob release button.
* Be careful not to damage the key fob or the battery compartment cover when prying them open.
* Make sure that you insert the new battery correctly. If the battery is inserted incorrectly, it could damage the key fob.
* If you have any questions about opening the key fob, consult your car's owner's manual.
