How do you get the centrifugal clutch nut off your 2007 Honda 250 recon?

- 19mm socket

- Ratchet

- Extension

- Breaker bar

- Block of wood

Instructions:

1. Loosen the 19mm nut on the end of the crankshaft with a 19mm socket, ratchet, and extension.

2. Place a block of wood against the clutch bell to prevent the clutch basket from turning with the nut.

3. Use the breaker bar as a lever to loosen the clutch nut.

4. Remove the nut and washer from the crankshaft.

Note: The clutch nut may be tight, so you may need to use a long breaker bar or pipe to loosen it.

Once the clutch nut is removed, you can proceed with removing the clutch bell and other clutch parts.