1. Locate the handlebar clamps. The handlebar clamps are located on the top of the triple tree, just below the handlebars. They are held in place by four bolts.
2. Loosen the handlebar clamp bolts. Use a 12mm socket or wrench to loosen the four bolts that hold the handlebar clamps in place.
3. Adjust the handlebars. Once the bolts are loosened, you can adjust the handlebars to the desired position.
4. Tighten the handlebar clamp bolts. Once you have the handlebars in the desired position, tighten the four handlebar clamp bolts to secure them in place.
5. Test the handlebars. Make sure that the handlebars are securely tightened before riding the motorcycle.
Here are some additional tips for adjusting the handlebars on a Honda Rebel:
- When adjusting the handlebars, make sure that they are not too high or too low. The ideal height for the handlebars is about level with your hips.
- If you have short arms, you may want to adjust the handlebars so that they are a bit closer to you.
- If you have long arms, you may want to adjust the handlebars so that they are a bit further away from you.
- Make sure that the handlebars are comfortable to reach when you are sitting in the riding position.
