* A plastic bottle (such as a water bottle or soda bottle)
* A drill
* A 1/2-inch drill bit
* A 3/8-inch drill bit
* A funnel
* A length of tubing (such as aquarium tubing)
* A hose clamp
* Coolant
Instructions:
Step 1:Drill two holes in the plastic bottle. One hole should be located near the top of the bottle, and the second hole should be located near the bottom.
Step 2:Drill a 1/4-inch hole in the lid of the plastic bottle.
Step 3:Insert the funnel into the hole in the top of the bottle, and then pour the coolant into the reservoir.
Step 4:Once the reservoir is full, close the lid and fasten the hose clamp to the lid.
Step 5:Connect the free end of the tubing to your motorcycle's radiator.
Your motorcycle coolant reservoir is now complete!
