* Phillips head screwdriver
* Flat head screwdriver
* Socket wrench set
* 13mm socket
* 17mm socket
* Seatbelts (if not already installed)
Step 1: Remove the old seatbelts (if applicable)
1. Locate the seatbelt anchor bolts on the floor of the vehicle. There should be two bolts on each side of the vehicle.
2. Use the 13mm socket to loosen and remove the seatbelt anchor bolts.
3. Remove the old seatbelts from the vehicle.
Step 2: Remove the old seats
1. Locate the four seat track bolts on each side of the vehicle. The seat track bolts are located at the front and rear of the seat tracks.
2. Use the 17mm socket to loosen and remove the seat track bolts.
3. Slide the old seats out of the vehicle.
Step 3: Install the new seats
1. Slide the new seats into the vehicle.
2. Align the seat track bolts with the holes in the seat tracks.
3. Use the 17mm socket to tighten the seat track bolts.
4. Install the seatbelts (if not already installed).
Step 4: Adjust the seats
1. Sit in the driver's seat and adjust the seat forward or backward until you find a comfortable driving position.
2. Adjust the seatback angle by pulling up or pushing down on the seatback lever.
3. Repeat steps 1 and 2 for the passenger seat.
Your new seats are now installed and ready to use!
