- 17mm wrench
- 19mm wrench
- Ball joint separator
Instructions:
1. Locate the inner tie rod on the steering rack. It is the rod that connects the steering rack to the wheel hub.
2. Loosen the 17mm nut that holds the inner tie rod to the steering rack. Do not remove the nut completely.
3. Separate the ball joint from the steering knuckle using the ball joint separator.
4. Once the ball joint is separated, remove the 17mm nut and take off the inner tie rod.
5. Replace the inner tie rod with a new one and reverse the steps to reinstall it.
6. Be sure to tighten the nut properly to ensure that the steering rack is securely attached to the wheel hub.
7. If necessary, do both.
8. You should now be able to remove the inner tie rod from your Peugeot 306.
