Auto >> AutoSPT >  >> Auto Repair

How do you change front brake pads on 1999 vectra?

Tools and materials needed:

- Replacement brake pads

- Brake caliper grease

- C-clamp

- Flathead screwdriver

- 10mm socket wrench

Instructions:

1. Park your vehicle on a level surface and turn off the engine.

2. Using the flat head screwdriver pry open the dust cover on the brake caliper.

3. Pull the retaining pin out of the brake caliper. Use a C-clamp or a large screwdriver to depress the caliper piston.

4. Remove the old brake pads.

5. Apply brake caliper grease to the backs of the new pads and slide them into place.

6. Replace the retaining pin and reinstall the dust cover.

7. Repeat steps 3-6 for the other side.

Auto Repair
Why does your Ford F-250 stall when put in reverse? What’s That Rattle? The Most Common Car Problems You’ll Face After Off-Roading
Car Care
4 Reasons to Buy a 2022 Chevy Corvette, Not a 2022 Audi R8 The Best-Ever Car Scenes in Movies How do you fold rear seat of a Mercedes Benz c230 kompressor?
Engine
1995 suburban service engine light on Does this vehicle have both a check and Just bought the I am trying not to be too worried? What causes engine overheating?
Electric Car
Why would the brake lights on one side of a 95 legacy sedan work but not tail when fine other car? Why does your 1997 gmc truck not move in reverse? Why is the automatic transmission stuck in drive and shifter just moves freely on a 1997 Chevy Cavalier?
Autopilot
How fast does a r1 moto go in first gear? Becoming an Autonomous Vehicle Engineer – Part 2: Software Skills
Car Photos
How do you replace a taillight on Toyota Previa? Mahindra U321 2018 STD Exterior What is proper headlight adjustment on a 2005 Honda 750 Shadow Aero Do you get certain number of feet back from wall and then the light should hit at height?