1. Disconnect the power source from the tractor.
2. Remove the transmission access cover.
3. Locate the pulley tensioner.
4. Loosen the pulley tensioner adjustment nut to reduce tension on the belt.
5. Slide the belt off of the pulley.
6. Remove the pulley.
7. Clean the pulley and the area around it.
8. Replace the pulley.
9. Tighten the pulley tensioner adjustment nut to the recommended torque.
10. Reinstall the transmission access cover.
11. Reconnect the power source.
Here are some additional tips for loosening the sheaves on a pulley:
- Use the correct tools for the job.
- Be careful not to damage the pulley or the surrounding components.
- If you have any doubts, consult your tractor's manual or a qualified mechanic.
