Materials:
- Safety glasses
- Gloves
- Cleaning brush (such as a wire brush or stiff nylon brush)
- Degreaser or dishwashing liquid
- Hot water
- Clean rags
- Bucket or container
Procedure:
1. Safety First: Wear safety glasses and gloves to protect yourself.
2. Prepare Cleaning Solution: Mix a degreaser or dishwashing liquid with hot water in a bucket. The hot water will help dissolve the grease.
3. Scrub the Sockets: Dip the cleaning brush into the cleaning solution and scrub the sockets. Ensure you reach into the deep areas of the sockets and remove any caked-on grease.
4. Focus on the Rachet Mechanism: Pay particular attention to the ratchet mechanism of the socket wrenches. This area can accumulate a lot of grease and dirt. Use the brush to remove any build-up.
5. Rinse with Water: Rinse the sockets and socket wrenches thoroughly with hot water to remove the cleaning solution and any remaining grease.
6. Repeat if Necessary: If there is still some stubborn grease, repeat steps 3 and 4 until all grease is removed.
7. Dry the Tools: Use clean rags to dry the sockets and socket wrenches immediately to prevent rusting.
8. Lubricate: Once the tools are dry, apply a small amount of lubricating oil to the moving parts of the socket wrenches. This will prevent them from becoming stiff or seizing up.
Remember to clean your sockets and socket wrenches regularly to maintain their functionality and extend their lifespan.
