Step 1: Prepare the vehicle. Make sure the vehicle is turned off and the parking brake is engaged.
Step 2: Locate the service reset switch. The service reset switch is located on the right-hand side of the instrument panel, just below the steering wheel. It is a small, black button with the words "Service Reset" printed on it.
Step 3: Press and hold the service reset switch. Press and hold the service reset switch for at least 10 seconds. The service indicator light should begin to flash.
Step 4: Release the service reset switch. Once the service indicator light begins to flash, release the service reset switch. The service indicator light should turn off.
Step 5: Verify the service indicator has been reset. Turn the ignition key to the "ON" position without starting the engine. The service indicator light should remain off.
That's it! You have successfully reset the service indicator on your Nissan Navara 2008.
