1. Park your vehicle in a safe location and apply the parking brake.
2. Locate the rear turn signal assembly. The turn signal assembly is located in the rear of the vehicle, on the side of the vehicle where you want to replace the bulb.
3. Remove the screws that hold the turn signal assembly in place. There are two screws that hold the turn signal assembly in place. Use a Phillips head screwdriver to remove the screws.
4. Remove the turn signal assembly from the vehicle. Once the screws are removed, you can pull the turn signal assembly straight out of the vehicle. Be careful not to drop the turn signal assembly.
5. Replace the turn signal bulb. The turn signal bulb is located inside the turn signal assembly. To replace the bulb, simply twist the old bulb counterclockwise to remove it, and then twist the new bulb clockwise to install it.
6. Reinstall the turn signal assembly. Once the new bulb is installed, you can reinstall the turn signal assembly in the vehicle. To do this, simply slide the turn signal assembly back into place and insert the screws to secure it.
7. Tighten the screws. Tighten the screws until they are snug.
8. Test the turn signal. Turn on the turn signal to make sure that it is working properly.
