Tools and Materials:
- Phillips Head Screwdriver
- Flathead Screwdriver
- T25 Torx Screwdriver
- Replacement Interior Door Handle
Steps:
1. Open the door and locate the screws holding the door handle in place.
2. Use a Phillips head screwdriver to remove the screws.
3. Use a flathead screwdriver to pry the door handle cover off. There may be a small clip or tab holding the cover in place.
4. Disconnect the electrical connector (if applicable).
5. Use the T25 Torx screwdriver to remove the bolts that secure the door handle to the door.
6. Once all the bolts are removed, pull the door handle out from the door.
7. Take your replacement door handle and connect the electrical connector (if applicable).
8. Insert the door handle into the door and align it with the bolt holes.
9. Insert the bolts and tighten them with the T25 Torx screwdriver.
10. Replace the cover and secure it with the screws.
11. Test the door handle to ensure that it is working properly.
