- Replacement secondary air relay injection valve
- Socket set
- Wrench set
- Safety glasses
- Gloves
Instructions:
Step 1: Disconnect Battery:
1. Disconnect the battery's negative terminal using the wrench.
Step 2: Locate Secondary Air Relay Injection Valve:
2. Open the hood of the Taurus and locate the secondary air relay injection valve.
Step 3: Remove the Valve:
3. Follow these steps to remove the valve:
- Disconnect the electrical connector from the valve.
- Loosen and remove the mounting bolts securing the valve.
- Remove the old secondary air relay injection valve.
Step 4: Install the New Valve:
4. Place the new secondary air relay injection valve in its position and secure it with the mounting bolts.
Step 5: Reconnect the Electrical Connector:
5. Reconnect the electrical connector to the secondary air relay injection valve.
Step 6: Reconnect the Battery:
6. Connect the battery's negative terminal using the wrench.
Step 7: Test the System:
7. Start the vehicle and let it run for a few minutes. Listen for any unusual sounds or check for any warning lights on the dashboard. If everything seems normal, the replacement is complete.
Tips:
- Make sure you purchase the correct replacement valve for your specific Taurus model.
- Refer to the vehicle's repair manual or consult with a qualified mechanic if you have any doubts or concerns during the replacement process.
