- A Phillips head screwdriver
- A flat head screwdriver
- A pair of pliers
Step 1: Remove the trim panel
1. Use the Phillips head screwdriver to remove the two screws that hold the trim panel in place.
2. Once the screws are removed, use the flat head screwdriver to pry the trim panel off of the dash.
Step 2: Remove the radio
1. Use the pliers to remove the two nuts that hold the radio in place.
2. Once the nuts are removed, pull the radio out of the dash.
Step 3: Disconnect the wiring
1. Use the flat head screwdriver to pry the wiring harness off of the back of the radio.
2. Once the wiring harness is disconnected, the radio is free to be removed.
Step 4: Reinstall the trim panel
1. Reinstall the trim panel by snapping it back into place.
2. Secure the trim panel with the two Phillips head screws.
