- Flat head screwdriver
- Phillips head screwdriver
Instructions:
1. Park your car in a safe location and turn off the engine.
2. Locate the headlight assembly that you need to replace the bulb in.
3. Use the flat head screwdriver to remove the two screws that hold the headlight assembly in place.
4. Gently pry the headlight assembly out of the car, being careful not to drop it.
5. Unplug the electrical connector from the back of the headlight assembly.
6. Use the Phillips head screwdriver to remove the screws that hold the old light bulb in place.
7. Remove the old light bulb and insert the new one.
8. Replace the screws that hold the new light bulb in place.
9. Plug the electrical connector back into the back of the headlight assembly.
10. Gently pry the headlight assembly back into the car and replace the two screws that hold it in place.
11. Test the new light bulb to make sure it works.
Tips:
- If you have trouble removing the headlight assembly, you may need to use a pry bar or a flat head screwdriver to help you.
- Be careful not to drop the headlight assembly when you are removing it.
- Make sure that the electrical connector is properly plugged in when you are installing the new light bulb.
