1. Unplug your Navigator from the power source.
2. Turn the Navigator upside down and locate the blade retainer screw on the bottom of the unit.
3. Use a screwdriver to loosen and remove the blade retainer screw.
4. Lift off the old blade and replace it with the new blade.
5. Reinstall the blade retainer screw and tighten it securely.
6. Turn your Navigator right side up and plug it into the power source to use it again.
Here are some additional tips for changing the blade on your Black & Decker Navigator:
- Make sure to use a replacement blade that is compatible with your specific Navigator model.
- If you are having trouble removing the blade retainer screw, you can try using a small amount of lubricant to loosen it.
- Be careful not to lose the blade retainer screw when you are replacing the blade.
- If you have any questions or concerns, you can always contact Black & Decker customer service for assistance.
