1. Insert your ignition key into the driver’s side door lock cylinder and turn it to the “Unlock” position.
2. Open the driver’s side door.
3. Locate the “Valet” switch inside the driver’s side footwell.
4. Press and hold the “Valet” switch until you hear a single chime.
5. Release the “Valet” switch.
6. Your alarm is now disabled.
7. Press and hold the “Lock” and “Unlock” buttons on your keyless entry remote simultaneously. (The “Lock” button is the upper button on the remote, and the “Unlock” button is the lower button.)
8. Hold both buttons down for at least 10 seconds.
9. Release the buttons after hearing a single chime.
10. Your alarm is now reset.
