_Disclaimer: This guide is provided for informational purposes only. If you are not comfortable working on your vehicle or do not have the necessary tools, it is recommended to seek the assistance of a professional mechanic._
1. Gather Tools and Materials:
a. Replacement starter motor (check the specific fit for your vehicle model and engine type).
b. Socket set (metric sizes)
c. Wrench set
d. Screwdriver
e. Safety glasses
f. Jack and jack stands (optional, for improved access)
2. Prepare the Vehicle:
a. Park the vehicle on a level surface, engage the parking brake, and turn off the engine.
b. If you plan to lift the vehicle with jack stands, place them securely under the designated areas as per your vehicle's manual.
3. Disconnect the Battery:
a. Locate the battery in your engine bay.
b. Disconnect the negative (-) battery terminal to prevent any electrical shorts during the repair.
4. Remove the Air Cleaner Box (if necessary):
a. In some Nissan Stanza models, the air cleaner box might obstruct easy access to the starter motor.
b. Refer to your vehicle's manual for instructions on removing the air cleaner box safely.
5. Locate the Starter Motor:
a. The starter motor is usually mounted on the engine block, near the transmission.
b. Identify it as a cylindrical-shaped component with electrical wires connected to it.
6. Disconnect Electrical Connections:
a. Carefully remove the electrical connections attached to the starter motor using a wrench or screwdriver.
b. Make note of the wire positions to ensure proper reconnection later.
7. Remove Starter Mounting Bolts:
a. Identify and remove the bolts securing the starter motor to the engine block.
b. Use the appropriate socket or wrench for these bolts.
8. Remove the Starter Motor:
a. Once the electrical connections are detached and the mounting bolts are removed, gently wiggle and pull the starter motor to release it from its position.
b. Be cautious as the starter motor might be heavy.
9. Install the New Starter Motor:
a. Position the new starter motor in place, aligning it with the mounting points.
b. Reinstall the mounting bolts and tighten them securely.
10. Reconnect Electrical Connections:
a. Reconnect the electrical wires to the starter motor terminals, ensuring they are properly seated.
11. Reinstall Air Cleaner Box (if applicable):
a. If you had to remove the air cleaner box earlier, reinstall it securely using the appropriate fasteners.
12. Reconnect Battery:
a. Reconnect the negative (-) battery terminal to the battery.
13. Test the Starter Motor:
a. Attempt to start the vehicle. The engine should crank and start normally if the starter motor is correctly installed and connected.
14. Lower the vehicle (if applicable):
a. If you used jack stands, carefully lower the vehicle back to the ground using the jack.
Ensure proper fitment and connection of all components to avoid potential performance or safety issues. As with any automotive repair, it is advisable to consult your vehicle's specific service manual for any discrepancies or additional instructions related to your Nissan Stanza model. If you encounter difficulties or feel uncertain, seek professional assistance.
