Materials Needed:
1. New cabin air filter (check owner's manual for specific model and size)
2. Pliers or a flat-head screwdriver
Instructions:
1. Locate the Cabin Air Filter Housing:
- Open the hood of your vehicle and on the passenger side, locate the cabin air filter housing. It is usually a black plastic compartment located towards the base of the windshield.
- In the 1995 Lexus GS 300, the cabin air filter housing is positioned behind the glove box. To access it, you will need to remove the glove box.
2. Open the Filter Housing:
- With the glove box removed, you will see a rectangular panel held by a few screws.
- Using a screwdriver or pliers, carefully remove the screws and open the filter housing.
3. Remove the Old Filter:
- Once the housing is open, you should be able to see the old cabin air filter inside.
- Grasp the filter by its edges and gently pull it out of the housing.
- Dispose of the old filter properly.
4. Install the New Filter:
- Ensure the new cabin air filter faces the correct direction. The arrow should point towards the passenger compartment.
- Insert the new filter into the housing, ensuring it is seated properly and flush against the housing frame.
- Make sure the filter sits snugly in place.
5. Close the Filter Housing:
- Once the new filter is installed, replace the cover or panel of the filter housing and secure it with the screws you removed earlier.
6. Reattach the Glove Box:
- If you had to remove the glove box to access the filter housing, reinstall it by aligning it and pushing it back in place.
That's it! You have successfully replaced the cabin air filter in your 1995 Lexus GS 300. Regularly replacing the cabin air filter helps maintain a clean and comfortable environment inside the vehicle by trapping dust, pollen, and other airborne pollutants.
