1. Gather the necessary tools. You will need a Phillips head screwdriver, a flat head screwdriver, and a pry tool.
2. Disconnect the battery. This will prevent any electrical damage from occurring while you are working.
3. Remove the screws holding the faceplate in place. There are two screws located at the top of the faceplate and two screws located at the bottom.
4. Pry the faceplate off of the dash. Use the pry tool to carefully pry the faceplate off of the dash. Be careful not to damage the faceplate or the dash.
5. Replace the clock. Remove the old clock from the faceplate and install the new clock.
6. Reattach the faceplate. Align the faceplate with the dash and press it into place.
7. Replace the screws. Replace the four screws that you removed in step 2.
8. Reconnect the battery.
The faceplate is now removed and the clock has been replaced.