1. Park your car on a level surface and turn off the engine.
2. Open the hood of your car.
3. Locate the right side engine mount. It is located on the passenger side of the engine, near the front.
4. Remove the three bolts that attach the engine mount to the engine.
- You will need a 14mm socket to remove these bolts.
5. Remove the two nuts that attach the engine mount to the subframe.
- You will need a 17mm socket to remove these nuts.
6. Remove the old engine mount from the car.
7. Install the new engine mount.
- Align the new engine mount with the holes in the engine and subframe.
- Insert the three bolts into the holes in the engine and tighten them with a 14mm socket.
- Insert the two nuts into the holes in the subframe and tighten them with a 17mm socket.
8. Lower the hood of your car.
