1. Gather your tools and materials.
You will need the following:
- New wiper refill
- Flat-head screwdriver
- Pliers
- Soap and water
2. Open the rear hatch of the Nissan Quest.
Locate the wiper arm at the rear of the vehicle.
3. Pinch the release tabs on the wiper blade.
Using your fingers or a flat-head screwdriver, pinch the release tabs on the wiper blade.
4. Pull the wiper blade off the wiper arm.
Once the release tabs are disengaged, pull the wiper blade off the wiper arm.
5. Clean the wiper arm.
Use the soap, water, and the flat head screwdriver to remove any dirt or debris from the wiper arm.
6. Slide the new wiper refill onto the wiper arm.
Ensure that the refill is seated properly on the arm.
7. Snap the release tabs back into place.
Make sure the wiper blade is securely attached to the wiper arm.
8. Test the rear wiper.
Turn the rear wiper on and off a few times to make sure it is working properly.
