1. Replacement bulb (12V, 21W)
2. Flat-head screwdriver
3. Pliers
Instructions:
1. Locate the rear stop light assembly on the side of the vehicle that needs the bulb replaced. The stop light assembly is located inside the trunk.
2. Use a flat-head screwdriver to gently pry open the plastic cover of the rear stop light assembly.
3. Once the cover is removed, you will see the stop light bulb.
4. Use the pliers to gently pull out the old bulb from its socket.
5. Insert the new bulb into the socket and turn it clockwise until it is secure.
6. Replace the plastic cover and press it firmly until it snaps into place.
7. Test the rear stop light to ensure that it is working properly.