Here's a step-by-step guide:
1. Gather your tools and materials.
- New license plate bulb(s) (refer to your owner's manual for the correct size and type).
- Flat-head screwdriver or trim removal tool.
2. Open Trunk and Remove Trunk Liner:
- Open your vehicle’s trunk and remove the trunk liner behind the license plate.
3. Remove License Plate
- Using a Phillips-head screwdriver, remove the two screws securing the license plate to the trunk.
- Set aside the screws and remove the license plate.
4. Remove Old Bulb:
- Locate the license plate bulb socket behind the license plate.
- Use a flat-head screwdriver or trim removal tool to gently pry open the bulb socket.
- Remove the old bulb from the socket.
5. Install New Bulb:
-Take the new license plate bulb and insert it into the socket, making sure it's seated firmly.
6. Replace License Plate:
- Replace the license plate, making sure to align the holes with the screws you removed earlier.
- Replace the screws to secure the license plate in place.
7. Test the Bulb:
- Turn on your headlights and check if the license plate bulb is working.
That's it! You have successfully replaced the license plate bulbs on your 2004 Nissan Sentra. If you encounter any difficulties during the process, refer to your owner's manual or seek assistance from a qualified mechanic.
