* A Phillips head screwdriver
* A flat head screwdriver
* A 10mm socket wrench
* A ratchet
1. Open the trunk of your Honda CR-V and remove the four plastic Phillips head screws that hold the trunk liner in place.
2. Pry the trunk liner up and out of the way.
3. Remove the two bolts that hold the rear bumper in place on each side of the vehicle.
4. Remove the four plastic push-pin clips that hold the rear bumper in place at the bottom.
5. Gently pull the rear bumper away from the vehicle and disconnect the electrical connectors.
6. The rear bumper is now removed.
To reinstall the rear bumper, simply follow the steps in reverse order.
