1. Oil filter wrench
2. Drain pan
3. Bungee cord
4. 3/8" socket wrench
5. 10 mm socket
6. Pliers
7. Clean rag
8. Oil
9. Valve Cover Gasket
10. Spark Plug Wires
Procedure
1. Drain the oil.
* Unbolt the oil drain pan bolt
* Let the oil drain completely
* Replace the oil drain pan bolt
* Add new oil to the engine
* Remove the air filter box.
2. Remove the spark plug wires.
* Use a pair of pliers to remove the spark plug wires from the spark plugs
* Store the spark plug wires in a safe place
3. Remove the old valve cover gasket
* Use a bungee cord to secure the valve cover to the engine
* Remove the old valve cover gasket
4. Install the new valve cover gasket.
* Place the new valve cover gasket on the engine.
* Use a bungee cord to secure the valve cover to the engine
5. Install the spark plug wires.
* Reattach the spark plug wires to the spark plugs.
* Push down the spark plug wires to make sure they are secure
6. Reinstall the oil filter.
* Place a new oil filter gasket on the oil filter
* Screw the oil filter onto the engine by hand
* Tighten the oil filter with an oil filter wrench
7. Start the engine and let it run for a few minutes.
* Check for any leaks around the valve cover gasket.
* If there are no leaks, the job is complete.
