Auto >> AutoSPT >  >> Auto Repair

How do you get the bottom line undone when replacing power steering pump on a 1998 Ford Taurus?

There is no bottom line to undo when replacing the power steering pump on a 1998 Ford Taurus.

Here is a step-by-step guide on how to replace the power steering pump on a 1998 Ford Taurus:

1. Disconnect the negative battery cable.

2. Drain the power steering fluid.

3. Remove the serpentine belt.

4. Remove the power steering pump pulley.

5. Disconnect the power steering lines.

6. Remove the power steering pump mounting bolts.

7. Remove the power steering pump.

8. Install the new power steering pump.

9. Reinstall the power steering pump mounting bolts.

10. Reinstall the power steering pump pulley.

11. Reinstall the serpentine belt.

12. Refill the power steering fluid.

13. Reconnect the negative battery cable.

14. Start the engine and check for leaks.

Please note that this guide is just a general overview of the steps involved in replacing the power steering pump on a 1998 Ford Taurus.

It is always a good idea to refer to a professional repair shop manual or a knowledgeable mechanic for specific instructions and safety tips.