- New Brake Pads
- C-Clamp
- Flathead screwdriver
- Socket set
- Jack and jack stands
- Safety glasses
Procedure:
1. Park your vehicle on a level surface and engage the parking brake. Turn off the engine and allow it to cool down.
2. Loosen the lug nuts on the wheels that you will be working on. Do not remove the lug nuts completely.
3. Jack up the vehicle and support it on jack stands. Make sure that the vehicle is stable and secure before proceeding.
4. Remove the lug nuts and wheels.
5. Locate the brake caliper on the wheel hub. The brake caliper is the metal housing that contains the brake pads.
6. Remove the two bolts that hold the brake caliper in place. Use the appropriate size socket wrench.
7. Once the bolts are removed, lift the brake caliper off of the brake pads. Be careful not to damage the brake pads or rotor.
8. Inspect the old brake pads. Look for any signs of wear or damage.
9. If the brake pads are worn or damaged, replace them with new ones. Make sure that the new brake pads are the correct size and shape for your vehicle.
10. Lubricate the guide pins on the brake caliper. This will help to prevent the brake pads from sticking.
11. Reinstall the brake caliper and secure it with the bolts that you removed earlier.
12. Replace the wheel and lug nuts. Tighten the lug nuts until they are snug, but do not overtighten them.
13. Lower the vehicle from the jack stands.
14. Press the brake pedal several times to seat the new brake pads.
15. Test the brakes to make sure that they are working properly.
Note: If you are uncomfortable performing this procedure yourself, you can take your vehicle to a qualified mechanic for brake repair.
