1. Locate the Rear Windshield Wiper: Identify the rear wiper arm on the back of the vehicle.
2. Release the Locking Mechanism: Most wiper blades have a small locking mechanism that holds them in place. Locate the release button or mechanism on the wiper arm and press or slide it to release the blade.
3. Lift and Remove: Once the locking mechanism is released, lift the wiper arm and remove the old wiper blade by pulling it straight out of the arm.
4. Install the New Wiper: Take the new wiper blade and insert it into the wiper arm. Make sure it is securely attached and engages with the locking mechanism.
5. Test the Wiper: Lower the wiper arm back onto the windshield and test the new wiper blade by turning on the rear wiper switch.
Here are additional tips and considerations when replacing the rear windshield wiper on a Mazda CX-7:
- Some wiper blades may require a twist or a slight turn before they can be lifted off the wiper arm.
- When installing the new wiper blade, make sure the blade is properly seated and aligned with the windshield.
- Check the wiper arm and the wiper blade for any damage or wear. If any part is damaged or excessively worn, consider replacing it as well.
- Ensure that the new wiper blade is the correct size for your vehicle.
- If you live in an area with harsh weather conditions, you may want to consider purchasing a winter wiper blade for better performance in snow and ice.
Remember to follow the instructions in your vehicle's owner's manual for the most accurate and up-to-date guidelines on replacing the rear windshield wiper on your Mazda CX-7.
