1. Park your vehicle in a safe location and turn off the engine. Allow it to cool down if necessary.
2. Open the trunk of your vehicle.
3. Locate the third brake light. It is located at the rear of the vehicle, above the trunk.
4. Disconnect the electrical connector for the third brake light by gently prying it apart.
5. Remove the two bolts that secure the third brake light using the appropriate size wrench or screwdriver.
6. Remove the old brake light by pulling it straight out.
7. Install the new brake light by inserting it into the opening in the rear of the vehicle.
8. Insert the two bolts that secure the third brake light into their respective holes and hand tighten.
9. Tighten the bolts using a wrench or screwdriver until they are secure, be careful not to over tighten.
10. Reconnect the electrical connector for the third brake light.
11. Verify that the third brake light is working properly.
12. Close the trunk of your vehicle.
